Tourque Settings & Assembly Details (Video)

All frame bolts including the brake mount bolts need to be tightened to 12 Nm. The main pivot nut needs to be tightened to 50 Nm. Make sure to use a thread-locker in medium strength for the brake mount bolts. All frame bolts should be assembled with grease on all contact surfaces with a drop of medium strength thread-locker on the thread. 

Main Axle 50 Nm
Frame Pivot Bolts 12 Nm
Brake Mount Bolts 12 Nm
Dropout Bolt 5 Nm
Cable Guides 3 Nm
Seat Post Clamp 5 Nm
Rear Wheel Axle 15 Nm