Jibb V2 Torque Settings

All frame bolts require a specific torque setting that are shown in the image below. Under- or over-tightening bolts may result in damage to the components. The brake mount bolts need to be assembled with medium thread-locker. The frame bolts require grease on the contact surfaces and a small amount of medium thread locker on the threads. The cable guide bolts should be greased before assembly. 

1. Main Axle 50 Nm
2. Frame Pivot Bolts 12 Nm
3. Brake Mount Bolts 12 Nm
4. Dropout Bolt 5 Nm
5. Cable Guides 3 Nm
6. Seat Post Clamp 5 Nm
7. Rear Wheel Axle 15 Nm
8. Lower Shock Mount Bolts 12 Nm