Yalla!! V2 Cable Routing

The cable routing on the Yalla!! is completely external to simplify the installation and maintenance of the brake and rear derailleur. However, there are several details to pay attention to during assembly to guarantee unrestricted movement of the rear suspension and avoid damage or rubbing to the frame or components.

If you ride with your rear brake on the right, then we recommend to route both the brake and rear derailleur cables on the left side of the head tube, and secure them with the cable routing piece for two cables. Inside the cable routing piece it is marked with which cable goes where - 4mm is for the rear derailleur and 5mm is for the brake hose.

If you ride with your rear brake on the left, then we recommend to route one cable each side of the head tube. The brake hose can be on the right of the head tube, secured with a single cable clamp marked 5mm, and the rear derailleur cable can be on the left of the head tube, secured with a single cable clamp makered 4mm.

To avoid damage and rubbing of the cables on the frame, make sure that the cables and hose are assembled without being twisted. 

We recommend mounting the cables and hose with the shock disassembled, starting from the rear of the bike and working forwards, in order to be able to check the freedom of movement of the rear triangle.

Red: Rear Brake

Yellow: Rear Derailleur