Bearing Change

Which tools do you need for a bearing change?

All bearing seats on the Madonna/ Jibb frame are designed with two small recesses behind the outer race of the bearings. The bearings can be knocked out through these recesses using a hammer and a punch.

The Madonna does not require specific tools for the assembly of new bearings. Any tools for pressing in bearings are suitable, provided that the appropriate adapter for the bearing size is used (28mm and 52mm).

Please note that the bearing should always be pressed in over the outer race to prevent damage to the bearing.

This is applicable for the Madonna and the Jibb.

Still need help? Contact Us Contact Us